Hot and Cold Plate benefits

• Easy to use: The Hot and Cold Plate is connected to the Atlas Base using a bayonet fitting and is interchangeable with the standard Atlas Hot Plate.
• Compatible with a range of accessories: The Hot and Cold plate has a standard diameter of 13.5 cm (5 5/16”). This is compatible with the Atlas Stacking Dry Bath, Triple Dry Bath, Vial Baths, Orbit Parallel Reaction Station and virtually all other products designed to fit on hotplates.
• Integrated stirring: The Atlas Magnetic Stirrer module screws directly into the Hot and Cold Plate to provide high quality magnetic stirring.
• Accurate temperature control: The Hot and Cold Plate has an embedded RTD allowing feedback of plate temperature. Alternatively a PTFE coated RTD can be inserted in the reaction and that temperature controlled.
• Easy connection:The Hot and Cold Plate can be used with either standard M16 fittings or Atlas Quick Circulator Connecters which require no tools for a leak free rapid connection.
• Icing issues minimised: An integrated drip tray collects condensation and melting ice. A cover is also available to minimise ice build-up.
• Chemically resistant: The anodised aluminium plate provides a “wipe clean” surface.
• Wide temperature range: Fully tested between -40°C and 160°C.
• Temperatures logged: The temperature of the Hot and Cold plate is fully logged (as with all data on an Atlas System) and can be downloaded to a USB stick for offline analysis.

Insulating covers

Circulators that can be controlled by the Atlas Base

The Atlas Base unit can be used to directly control the following circulators (note that other types of circulator can be controlled using the Atlas Software or used without feedback control).

• Huber Unistat 340
• Huber Ministat CC230
• Huber Tango Nuevo
• Julabo (All modern Julabo circulators can be controlled from the Atlas front panel).