Die umfangreiche Applikationssammlung von YMC umfasst mehr als 2500 Analyten in 600 aktuellen Applikationen aus 13 Fachgebieten, wie der Biochromatographie, Umweltanalytik, Lebensmittelanalytik und für Inhaltsstoffe aus der pharmazeutischen Industrie.
Damit ist es eine hervorragende Quelle im Laboralltag für die Applikationsrecherche! Dabei finden Sie in der Online YMC Application Search nicht nur RP-Applikationen, sondern auch innovative Anwendungen für die IEX, SEC, HILIC und NP.
Besonders interessant sind auch die YMC-Applikationen aus dem Bereich der (U)HPLC. Neben dem Zeitgewinn durch enorm kurze Analysenzeiten, wird mit den (U)HPLC YMC-Applikationen auch der
Lösungsmittelverbrauch um bis zu 80% reduziert.
Erhalten Sie neueste Informationen auf der PREP 2011 in Boston
Kommen Sie zur PREP 2011 nach Boston?
Der Fachkongress PREP gilt als eine der ersten Anlaufstellen für die Präsentation und Diskussion der neuesten Entwicklungen im Bereich der präparativen Chromatographie.
Angemeldet sind Wissenschaftler und Medien-Hersteller aus aller Welt. Erleben Sie, wie die neuesten Produkte und Technologien das Tempo der Innovation in der wissenschaftlichen Forschung und Produktion vorantreiben.
In der als „am europäischsten“ aller amerikanischen Städten bezeichneten Stadt Boston fügt YMC sich nahtlos in das Motto der Tagung ein. YMC stellt die neuesten und fortschrittlichsten Medien vor. Dies sind unter anderem:
YMC-Triart, das Hybridmaterial mit ausgewogener Selektivität mit einer pH-Stabilität von pH 1 bis 12!
Die YMC*Gel HG-Serie: Silika-basiertes Material mit nochmals verbesserter mechanischer Stabilität bei sehr attraktiven Preisen.
YMC BioPro: das IEX Material mit hoher Bindungskapazität bei hohen Flußraten für äußerst ökonomische Trennungen.
Gerne besprechen wir mit Ihnen vor Ort, wie diese und die bestehenden YMC Materialien Ihnen helfen können, einen effizienteren Produktionsprozess zu verwirklichen. Vereinbaren Sie bereits jetzt im Vorfeld einen Termin mit uns.
Auch wenn Sie nicht in Boston dabei sein können, freuen wir uns auf Ihre Anfrage. Gerne besuchen wir Sie auch in Ihrer Firma.
Einfach Kontakt aufnehmen mit:
Information und Kontakt:
YMC Europe GmbH
Daniel Kune
Telefon: +49 (0)2064 427-270
Telefax: +49 (0)2064 427-222
E-Mail: kune@ymc.de
Trennung der 16 EPA-PAH mit Methanol-Wasser-Gradienten-Elution
Polyzyklische Aromatische Kohlenwasserstoffe (PAK) sind in der Umwelt weit verbreitete Schadstoffe und stehen teilweise im Verdacht karzinogen, mutagen und teratogen zu sein. Die Überwachnung dieser Substanzgruppe in Wasser, Erde, Luft und anderen biologischen Proben ist eine Routineaufgabe für viele Laboratorien.
Eine weit verbreitete Methode zur Gehaltsbestimmung der PAK ist die HPLC mit Gradientenelution. Aufgrund seiner vorteilhaften chromatographischen Eigenschaften wird dabei vorzugsweise Acetonitril als organisches Lösungsmittel zusammen mit Wasser im Laufmittel verwendet. Einige Anwender suchen jedoch aufgrund der in der Vergangenheit immer wieder aufgetretenen Lieferengpässe für Acetonitril alternative Laufmittel.
Daher präsentieren wir hier die Trennung der 16 PAK nach EPA 610 unter Verwendung eines Methanol/Wasser-Gradienten mit einer YMC PAH-Säule. Die Trennung aller 16 Substanzen gelingt mit hoher Auflösung aller Peaks, auch für die kritischen Peakpaare 7/8 (RS = 1.97) und 14/15 (RS = 2.85). Bei der Verwendung von Methanol an Stelle von Acetonitril ist die Elutionsumkehr von Benzo(ghi)perylen (Peak 14) und Dibenzo(ah)anthracen (Peak 15) zu beachten.
Bestellnummer Säule: YP99S051003QT
Für weitere Informationen wenden Sie sich bitte an:
Information und Kontakt:
YMC Europe GmbH
Dr. Wolfgang Schräder
Telefon: +49 (0)2064 427-290
Telefax: +49 (0)2064 427-120
E-Mail: schraeder@ymc.de
Syrris Application Note: Analysing Endotherms using Atlas
Key features of the ATLAS Potassium:
Quick change vessel: The oil drain unit, jacketed vessel clamp and quick oil connectors allow vessels to be changed in under a minute.
Easy to use: No tools required, twist and click control knob, large display and intuitive.
Full data capture: Data such as temperatures and stirrer speed is logged in a .csv file and can be downloaded to a USB stick.
Easy to upgrade: A wide range of accessories are available including vessels, stirrers, probes, etc.
1. Summary
This application note shows how atlas and reaction monitoring can be used to look at endothermic processes.
2. Experimental
Atlas was set-up with a 500ml jacketed reactor, scorpion stirrer system with propellor blade, an oil-drain unit (together with temperature nodes and RTDs), three temperature nodes (with triple node socket) and a Julabo recirculating heater/chiller (controlled by the atlas base). The Atlas system was set-up and connected to the circulator. 300ml of water was added to the reactor and was set to heat to 25ºC. Once the temperature was stable (ca. 20 minutes) 10g of solid urea was added (as a single dose) into the reactor. The temperature responses were recorded in a .csv on the Atlas base unit and downloaded (using a standard USB key) to PC for later analysis.
3. Results
4. Conclusions
Atlas reaction monitoring is an easy way to detect whether processes are exothermic, endothermic or enthalpy neutral. The ease of set-up, short equilibration time and stand alone operation make this system ideal for use in any process chemistry laboratory.
Information und Kontakt:
YMC Europe GmbH
Marc Ujma
Telefon: +49 (0)2064 427-227
Telefax: +49 (0)2064 427-222
E-Mail: ujma@ymc.de
Syrris Application Note: Tracking Exotherms using Atlas Reaction Monitoring
Key features of the ATLAS Potassium:
Quick change vessel: The oil drain unit, jacketed vessel clamp and quick oil connectors allow vessels to be changed in under a minute.
Easy to use: No tools required, twist and click control knob, large display and intuitive.
Full data capture: Data such as temperatures and stirrer speed is logged in a .csv file and can be downloaded to a USB stick.
Easy to upgrade: A wide range of accessories are available including vessels, stirrers, probes, etc.
1. Summary
This application note shows how atlas and reaction monitoring can be used to look at exothermic processes.
2. Experimental
Atlas was set-up with a 500ml jacketed reactor, scorpion overhead stirrer with propeller stirrer, an oil-drain unit, three temperature nodes (with node tree) and a Julabo recirculating heater/chiller (controlled by the Atlas base). 300ml of water was added to the reactor, which was heated to 25ºC. Once the temperature was stable (ca. 15 minutes) 10g of sodium hydroxide pellets were added into the reactor. It was subsequently found that two of the pellets were stuck to the addition funnel and these were added after 5 minutes as indicated on the graph. The temperature responses were recorded in a .csv file on the Atlas base unit and downloaded (using a standard USB key) to PC for later analysis.
3. Results
Upon analysis it is clear that the dissolution of solid sodium hydroxide in water is a strongly exothermic process. The addition of only two additional pellets of the sodium hydroxide caused an increase in Tr-Tj after 6 minutes on the above chart. This event was not visible on the temperature trace.
4. Conclusions
The Atlas system is able to monitor rapid exothermic events using Tr-Tj type reaction monitoring. The magnitude of the exothermic signal was over 12 degrees (compared with a reaction temperature shift of 5ºC). A smaller subsequent addition was only visible by considering the Tr-Tj graph. The complete experiment (including initial stabilisation) was conducted in less than thirty minutes showing how rapidly Atlas can be used to monitor exothermic reactions.
Information und Kontakt:
YMC Europe GmbH
Marc Ujma
Telefon: +49 (0)2064 427-227
Telefax: +49 (0)2064 427-222
E-Mail: ujma@ymc.de